Scar 17 – .308 Winchester 10.5 inch 1:8 SS
$750.00
Out of stock
Email me when stock available
Guaranteed safe checkout
Description
Description
FN SCAR 17 .308 Winchester 10.5-inch Barrel Assembly
This Deadshot Barrels product is a fixed-configuration barrel assembly for the FN SCAR 17. The details listed here apply to this particular item, rather than every custom barrel configuration. Current stock status is shown above.
Barrel specifications
- Platform: FN SCAR 17
- Chambering: .308 Winchester
- Length: 10.5-inch
- Material: stainless steel (SS)
- Twist rate: 1:8
About the .308 Winchester chambering
The .308 Winchester is broadly supported in commercial ammunition and used in target and field applications.
Compatibility and ordering
This short-barrel configuration has its own published twist and material specifications. Confirm that the complete assembly suits the intended platform.
Review the specific listing and current availability before purchasing. Contact us if you need to confirm anything not identified in the specifications.
What Do the Gas Block and Barrel Extension Do?
Gas block: The gas block is part of the SCAR’s piston operating system. It routes gas from the barrel into the operating system, with the gas regulator controlling that flow.
Barrel extension: This is the steel component at the rear of the barrel where the bolt locks into place. It’s an important part of the finished barrel assembly.
About Deadshot’s Gas Block Design
Some traditional FN SCAR gas blocks incorporate a folding front sight. Our gas block uses a sleeker design without the built-in sight, giving you the freedom to choose your own sight setup.
Our design retains adjustable gas regulation for suppressed and unsuppressed operation, similar to the FN system. We have tested our design with a variety of suppressors. This explains our gas-block design in general; the components included with a particular barrel assembly depend on that product’s specifications. Have a question about a specific suppressor or handguard? Reach out to us before ordering.
Returns and warranty
Shipped barrels are final sale for discretionary returns. We evaluate manufacturing-defect concerns under our warranty and address covered issues through an appropriate remedy. See our Refund Policy and Terms of Service.
Important: FN SCAR Gas Block
Parts not included: Deadshot FN SCAR barrels and barrel assemblies do not include a gas piston or gas-regulator knobs. Customers must use compatible FN or aftermarket components. Confirm compatibility with your specific SCAR model before ordering.
When a Deadshot Barrels FN SCAR barrel assembly is supplied with a fitted gas block or barrel extension, those supplied components are part of the completed assembly. Do not attempt to remove, replace, or modify either fitted component yourself. Improper removal or alteration can damage components and compromise safe operation. If a component appears missing, damaged, or incorrect on arrival, do not install or use the assembly; contact Deadshot Barrels with photographs before making changes. Damage or malfunction caused by gas-block removal, reinstallation, substitution, or modification is not covered as a manufacturing defect. Unrelated manufacturing defects and legally required remedies remain covered. Return and warranty policy.
Reviews (0)
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.