SCAR 15p 223W barrel assembly SS 1:7 10 inch
$750.00
Only 1 left in stock (can be backordered)
Guaranteed safe checkout
Description
Description
FN SCAR 15P .223 Wylde 10-inch Barrel Assembly
This Deadshot Barrels product is a fixed-configuration FN SCAR 15P barrel assembly. The specifications below describe this individual product rather than all custom barrel offerings. Review the current stock status before ordering.
Barrel specifications
- Platform: FN SCAR 15P
- Chambering: .223 Wylde
- Length: 10-inch
- Material: stainless steel (SS)
- Twist: 1:7
- Thread specification: 1/2×28
About the .223 Wylde chambering
.223 Wylde describes the chamber, not a separate type of ammunition. The chamber was designed for compatible use with both .223 Remington and 5.56 NATO cartridges in an appropriately configured rifle. That is why you may see a .223 Wylde barrel described alongside both of those familiar ammunition types.
The chamber label alone does not promise a particular accuracy result. Barrel length, rifling twist, ammunition, and the complete rifle all affect performance. The individual barrel specifications are listed above so you can distinguish this fixed configuration from other .223 Wylde products.
There is no special cartridge called .223 Wylde to buy. Follow the barrel markings and manufacturer’s ammunition guidance, and do not assume the same ammunition rules apply to an unrelated chamber.
Compatibility and ordering
Verify this fixed listing’s 10-inch barrel, chambering and associated components before purchasing.
Contact us before ordering if you need to verify an unlisted specification or the scope of an assembly.
What Do the Gas Block and Barrel Extension Do?
Gas block: The gas block is part of the SCAR’s piston operating system. It routes gas from the barrel into the operating system, with the gas regulator controlling that flow.
Barrel extension: This is the steel component at the rear of the barrel where the bolt locks into place. It’s an important part of the finished barrel assembly.
About Deadshot’s Gas Block Design
Some traditional FN SCAR gas blocks incorporate a folding front sight. Our gas block uses a sleeker design without the built-in sight, giving you the freedom to choose your own sight setup.
Our design retains adjustable gas regulation for suppressed and unsuppressed operation, similar to the FN system. We have tested our design with a variety of suppressors. This explains our gas-block design in general; the components included with a particular barrel assembly depend on that product’s specifications. Have a question about a specific suppressor or handguard? Reach out to us before ordering.
Still researching? Our Barrel FAQs cover barrel materials, twist rates, fitment, and common ordering questions.
Already bought this barrel?
You can still review a barrel even if it’s sold out. Sign in with the account you used for your order, then open the Reviews section below to share your feedback.
Returns and warranty
All sales are final by default. Discretionary return requests are reviewed individually and require prior approval. If a discretionary return is approved, a 25% restocking fee applies. We evaluate manufacturing-defect concerns under our warranty and address covered issues through an appropriate remedy. See our Refund Policy and Terms of Service.
Important: FN SCAR Gas Block
Parts not included: Deadshot FN SCAR barrels and barrel assemblies do not include a gas piston or gas-regulator knobs. Customers must use compatible FN or aftermarket components. Confirm compatibility with your specific SCAR model before ordering.
When a Deadshot Barrels FN SCAR barrel assembly is supplied with a fitted gas block or barrel extension, those supplied components are part of the completed assembly. Do not attempt to remove, replace, or modify either fitted component yourself. Improper removal or alteration can damage components and compromise safe operation. If a component appears missing, damaged, or incorrect on arrival, do not install or use the assembly; contact Deadshot Barrels with photographs before making changes. Damage or malfunction caused by gas-block removal, reinstallation, substitution, or modification is not covered as a manufacturing defect. Unrelated manufacturing defects and legally required remedies remain covered. Return and warranty policy.
