AR-15 – .204 RUGER
$220.00
Estimated production time: 3-8 weeks.
Guaranteed safe checkout
Description
Description
AR-15 .204 Ruger Custom Barrel
We make this AR-15 barrel chambered in .204 Ruger. Here’s what the cartridge means and what to check before ordering a custom barrel.
Why .204 Ruger?
.204 Ruger is a small-caliber centerfire cartridge well known in varmint shooting. It is often discussed for its high velocity and relatively flat trajectory with appropriate factory ammunition.
Although the number looks similar, .204 Ruger is not .223 Remington. They have different chambers and ammunition. The rifle’s complete configuration still matters.
Customize Your AR-15 Barrel
- Material and twist: Review the barrel steel and rifling twist choices for this chambering.
- Length and muzzle: The available lengths and muzzle finishes depend on the product options.
- Gas system: Check the offered gas-system lengths, gas-tube and gas-block options.
- Profile and finish: Review the barrel profile, gas-block diameter, fluting and other finishing selections.
- Related parts: Look for any matching-bolt or customer-supplied component requirements.
Before You Order
- Confirm the chambering: Order for .204 Ruger, not another cartridge with a similar name.
- Verify the rifle: Confirm your receiver, bolt and other relevant components are appropriate for this chambering.
- Check your choices: Each barrel is made to the specifications on your order. Make sure the selected options and related parts are correct.
Barrel Options Explained
CM and SS: CM means chrome-moly steel, which needs corrosion protection. SS is stainless steel, which resists corrosion better but still needs normal maintenance. The rifling twist and steel combinations are listed with the product choices.
Twist rate: A marking such as 1:7 means one complete turn of the rifling every seven inches; it isn’t a barrel-length measurement.
Gas-system length: Pistol, carbine, mid-length, rifle and magnum name different nominal gas-system layouts. The specific options depend on the product.
What is a gas tube? In a conventional AR gas system, the gas block routes gas from the barrel through a small tube toward the action. The gas tube is separate from both the barrel and the block. Review the Add Gas Tube? option if you need one included where offered; its type corresponds to the gas-system layout.
Barrel profile: Light, SOCOM, HBAR and Bull are common names for outside barrel contours. The profile describes barrel thickness and material distribution, which affect the weight.
Gas block and mounting diameter: Measurements such as .750 and .875 identify the outside diameter of the barrel where a gas block fits, not the caliber. A block can be fixed or adjustable, depending on the product choices. If you already have your own suitable gas block, look for the None selection where offered. Diameter alone doesn’t guarantee compatibility with the entire system.
Muzzle treatments: A target crown is an unthreaded muzzle finish. Threaded muzzles have a defined thread size and pitch. Magna Port is a muzzle-porting style, while Gill Cut refers to a specialty cut pattern. Ask us to confirm which finishes apply to the barrel you are considering.
Q / SIG taper (optional, no extra taper charge): Standard 5/8×24 muzzle threads typically have a flat, 90-degree shoulder behind them. The Q / SIG option uses those same threads with a 25-degree angled shoulder instead. Certain Q- and SIG-style muzzle devices and suppressor mounts are made to seat against this taper, giving the mount its intended contact surface. Why choose it? It is a fitment choice: select 5/8×24 Threads + Q/SIG Taper if your specific mount calls for a 25-degree taper, or choose standard 5/8×24 threads if it calls for a flat shoulder. The taper does not change the thread size or automatically improve accuracy. There is no extra taper charge beyond any existing threading cost. Check your mount specifications or ask Deadshot if you are unsure.
Barrel extension: The steel part at the rear of the barrel contains the locking surfaces for the bolt. It’s different from the gas block.
Fluting and finishes: Fluting refers to grooves cut into the exterior of the barrel. Cerakote and other finishes affect appearance and surface protection.
What Happens After You Order?
We use the specifications on your order to make the barrel. Estimated production time is 3–8 weeks, not a guaranteed delivery date. Contact us with your order number if you need to correct an order or check on progress.
Common Questions About This Barrel
Is .204 Ruger the same ammunition as .223 Remington?
No. They’re separate cartridges, and the ammunition cannot be treated as interchangeable.
How does twist rate differ from barrel length?
Twist rate is how far the rifling travels for one complete turn. Barrel length is the overall length of the barrel, and it’s chosen separately.
What if I need to change my custom order?
Contact us as soon as possible with your order number. Changes might not be possible after production starts, and cancellation terms may apply. See our Refund Policy.
Questions Before You Order?
Still comparing options? Our Barrel FAQs explain barrel materials, twist rates, common terminology, ordering and care.
Questions about the AR-15 .204 Ruger barrel or related components? Email us about this product or use our Contact page.
Returns and warranty
All sales are final by default. Discretionary return requests are reviewed individually and require prior approval. If a discretionary return is approved, a 25% restocking fee applies. A 15% cancellation fee applies after work has started. We evaluate manufacturing-defect concerns under our warranty; covered problems are addressed through an appropriate remedy. See our Refund Policy and Terms of Service.












